Feature Product
- 50ml set packing ultra shine and anti scratches ceramic glass coating
- 100% colorless & transparent nanotech coating.Super durable high gloss finish.Anti sand and tree branch scratches. Will never crack, peef off or turn yellow.Protect your vehicles over 2 years.
- Wide application area:Painted Surface, Rim, Lamp Cover, Plastic, Rubber, Metal surface etc. 100ml nanotech crystal car coating could treat 2 medium size cars with wipe method.
- Non-toxic, harmless and environmental friendly.
- Very easy to use. Please search "Rising Star Nanotech" on Youtube and watch No. 000001 and No.000002 video to learn how to apply and check the usage result.
Description
Product Description: Nanotech Crystal Car Coating is developed and produced by Rising Star Nanotech Company Limited. It creates a mirror like shine and produces hydrophobic and oleo-phobic effects. It could protect your car body against acid rain,salt fog corrosion, rust, oil stains, sap, bird dropping permeation, bugs,some scratches and more. One time application, it could protect your car body more than 2 years. After application, just leave it air drying, the glass coating could reach to 9H pencil hardness after dry. It is as hard as glass and will never crack, peel off or turn yellow and never need to be removed. Application Steps: Please read the application instructions well and search "Rising Star Nanotech" on YouTube and watch No. 000001 demo video. 1.Please use RS-B-CC05 or car shampoo and water to clean the grease, contamination and dirt on car body. Then dry it with microfiber towel. If there are hologram, swirls or micro scratches, you need to use polishing compound to remove them first, then use microfiber to clean your car again. 2.Using two pieces of air-laid paper to wrap a sponge applicator. 3.Dropping some RS-A-CCZ01 to wet the dust-free paper. 4. Use the sponge applicator to wipe RS-A-CCZ01 evenly on car body. Please wipe a 30x30cm area in both horizontal and vertical direction each time. 5. Following on to use a damp microfiber cloth to rub the treated area immediately until there are no visible moving traces or strips. 6. Repeating step 3 and step 4 on next area. 7. Leave the treated area to dry naturally. The surface of coating layer needs to dry at least 4-6 hours. So please do not touch or wet treated surface in next 12 hours. After 48 hours of application, could wash the car as usual. 8.Please seal and tighten the bottle cap and clean the sponge applicator with ethanol for next use.What's in the packing box?50ml Nanotech Crystal Car Coating, 1 pc of microfiber towel, 2 pcs of sponge applicator and 4 pcs of dust free paper.
0 comments:
Post a Comment