I have used several other ceramic coats over the last 5 or 6 years and I must say this one has been in the top 3. With any of these coating your results will depend on your prep work. To get the best results your finish will need to be clean and free of any debris or contaminates. My current vehicle was fairly new (less than 2000 miles) when I applied this coating. So mine didnt require as much prep work. Make sure when applying you work in relatively small sections at a time. I usually just do a panel at a time working my way around the vehicle until I am finished. Once you are finished my sure you are able to park your vehicle under a carport or in a garage as the coating needs time to cure. Once it is cured you can apply a coat of wax if you like which I did and the results are outstanding. The water sheets right off my vehicle saving me from having to chamois the vehicle down. I applied this coating about 4 months ago and its still holding up as good as the day I applied it. I have been a professional detailer for well over 25 years and I say without a doubt this is an amazing product if applied properly
I have applied this to a brand new BMW X5, which required to do light polish and finish prior to ceramic coating. And then, BAM the X5 came out better than when it was new. This stuff goes well on black plastic trims, wheels, and interior plastics. I literally used the whole bottle in a day ;)
This product does just as is described and shown in the video on their web site.
The Pro`s of this are
Once applied it looks amazing, restored the shine on my wife`s 2009 murano .
Its very easy to apply as its a liquid and goes on with minimum effort.
2 days in and its properly cured and is still brilliant shinning
The Con`s
This is a huge issue, and so easily to remedy and i`m talking about the application block, seriously if they made it any smaller it would be utterly worthless, and the very very small application cloth`s that come with the liquid hardly cover the application block, so your constantly having to adjust the cloth on the block as it moves and you end up having to adjust it,over and over..>> say hello to hand cramps keeping the cloth on the application block,,
My suggestion is make a block to keep the cloth in place . perhaps a bit larger as well.
Those are the only Con`s of this product.
The Pro`s
amazing shine , restores that factory look. simply amazing. we`ll see how long the shine will hold but so far so good.,
Its virtually flawless in its application as its a thin liquid and is smooth to apply with the exception of my above stated issue.
Thats about it for the good and the bad,
I highly HIGHLY recommend using any cutting wax if you have any colored dumb dings in the door that left some color from the moron who dinged your ride.
second, get a clay bar / liquid which ever, i ordered a clay kit, came with a nice microfiber cloth and a bottle of detailer, after this wipe it down with water to remove any wax or clay left over, trust me i forgot this last part and i spent hours fixing this disaster .
If you follow those 3 steps and have a clean dry vehicle your in for a treat . would and will buy this product again.
Great product but difficult to use.
Great product. Took me a while to figure out my timing since the conditions (temp in the garage) was hot and the drying time was brief. After 24 hours the application of a second coat went more smoothly. All in all, very satisfied with the product!
Feature Product
- Super hydrophobic, nanoscopic, high gloss, high durability ceramic car coating spray
- Creates a durable, protective layer against UV-rays, bird droppings, road salt, oxidation
- Easy to use use on all painted surfaces, glass, wheels and painted trim
- Lasts up to one year and up to 5X longer than car wax
- Can be used to extend gloss and water-repellency of ceramic coatings
Description
MIDNIGHT MIST is built from high-performance, temperature-resistant resins and tough ceramic nano-particles which penetrate and fill small sized crevices for improved appearance and durability. These tiny particles increase gloss, reduce chances of marring, and increase water repellency. MIDNIGHT MIST contains the maximum amount of SiO2 and polymer resin possible in a spray solution. This allows MIDNIGHT MIST to last up to one year and also be a spray-and-wipe product.
Incredible Easy-to-Achieve Results
- Applied to your vehicle's paint provides you with a protective layer against UV-rays, strong chemicals, bird droppings or road salt, and also prevents the paint's oxidation
- Is extremely easy and fast to apply
- Delivers a glossy hydrophobic finish
- Replaces conventional waxes and sealants lasts up to 5X longer than car wax
- Can be used to extend gloss and water-repellency of ceramic coatings
- Is part of the MIDNIGHT ceramic coating system, which utilizes a "community support" marketing model
Installation Directions:
- Prime a clean microfiber applicator with 1 spray then apply 1-2 sprays per 1'x1′ area, working with one panel at a time
- Wipe into surface until it almost disappears
- Let dwell for 1-3 minutes
- Using a clean soft microfiber towel, buff the surface until all excess product is removed
Tips:
- Wait 3 hours before exposing to water
- Wait 24 hours before washing
- When done turn bottle over and mist to clear nozzle
Part of the MIDNIGHT ceramic coating series:
- MIDNIGHT RINSE-Glossy Hydrophobic No-Rinse Car Wash
- MIDNIGHT: Intense Ceramic Coating-Intense Value
Manufactured in the USA by Micro Detailer, LLC
Is a process to apply. But im hopeful it holds up for as long as they say. Beads water like crazy and cleans up better than waxed cars do.
0 comments:
Post a Comment