I've seen many reviews and videos on this exact product, most were not favorable. I'm here to tell you, other than the application sheets this product works exactly as described. I figured for ten bucks and a little of my time WTH. Well the results were fantastic, I own a black Jeep JKU and I was having to wash it every 5 days or so. And because of the quality of the paint from the factory it would constantly haze up with almost a milky look to the paint. I first applied this product to only the drivers side to have a comparison with the untreated paint. I compounded my truck, used a clay bar, the used a clean microfiber cloth with wax and grease remover. I did one panel at a time, being patient and diligent. Well it was worth it, I am in North Eastern PA and we have had several storms over the last week, and the treated side looks unreal. I've always used 3M paint care products on my vehicles, but for some reason my jeep would always haze up after a week or so of waxing. But this has ended that problem. One piece of advice, follow the instructions and keep you vehicle dry for a few days after.
You must know what you are doing before apply it to your vehicle, otherwise it will be a nightmare. I did my on the side mirror wait 5 minute and screw up. Then I try it on the windshield and find that I need to wipe it right after applying because the weather is so wet. So I did it for the whole car and it work perfectly. After it dry for a whole day. I use turtle wax to clean the mess on the side mirror and reapply the way I did for the whole car. It's now shinny and water repelling as it advertise.
This is a ceramic coating which I applied myself and seems to work decently. It beads water, however, doesn't seem as slick as some of the other coatings which shows the water just sliding away. The directions how to use it is very confusing and I would recommend that people do a small section at a time. Wiping it on horizontally then vertically and using the liquid sparingly. After 5 minutes, wipe it down with a damp microfiber cloth and make sure you remove all residue. If you don't you will have high spots and cloudy areas which if not removed before the drying process happens it will form a layer which you will have to work hard at polishing/cutting off. Lesson learned. Also, best to do this in a garage where it will not rain. I wouldn't worry about rubbing any of the ceramic off as it apparently bonds quickly and any excess you can remove is just excess. Works on windows and wheels as well.
Honestly, look at the pictures I added and follow the instructions. NUFF SAID. This is a 2004 BMW with 148,000 miles, many of which are bug body highway miles. The stuff speaks for itself. The bumper in the AFTER, has 1-3 coats depending on the section, and I’ll stop after 5 total coats. Mad protection, mad smooth gloss, easy clean up, semi-permanent CRUSHING wax performance. Get ready to clay bar, because if you need it, that’s first ;)
I've seen better but for the price he cannot beat it.
Feature Product
- [SCRATCH RESISTANCE]:Anti sratch 9H hardness, with the hardness of super hydrofobowa glass coating. Its unique technology helps achieve a thick coating, the sacrifical coated on the surface can be used as a coat of the barrier.
- [CAR SURFACE PROTECTOR]:Anti-scratch Car Polish Liquid allows you to clean and protects your surface against sun staining and water spots,repair scratches, anti-static,anti-acid rain, glazing, anti-ultraviolet,anti-wear, anti-high temperature, and anti-oxidation.
- [EASY TO USE]:We have made an offical instruction video and application steps, please check it below Q&A and Review Comments. Wrap the cloth over coating sponge; Put coat liquid on the cloth; Spread the liquid on the car; Use towel to wipe and polish sponge over the coated fabric
- [Brightening]: After use this car liquid ceramic, the surface of car will forming a layer of crystals, like a mirror, forming a mirror full reflection effect, make it brightening 2 times
- [NOTE]:included 30ml Car Coating Ceramic and a Sponge. Kindly Note: lease do not touch or wet treated surface in next 12 hours; If you wanna remove it, use POLISH WAX will be ok.
Description
MR FIX 9H is a Nano-Ceramic Protective Paint Coating, Scratch Resistance, Chemical Resistance, UV Resistance, Thermal Resistance and Anti-Graffiti With both the Super Hydrophobic and Anti-Graffiti effect combined, your vehicle's surface will stay
Did a little test on the surface of a wood desk. Dries easily and has a smooth finish.
Seems it'll perform as expected over our car's finish.
love it my scratches are gone
First ceramic coating I ever used, but seems to be working like it should...cheap and does the job. Applied it my newly refurbished headlight covers to prevent it from scratches and oxidation and it made it super crystal clear and hydrophobic.
Super easy to use too, just don't follow instructions that came with the product. It was google translate from another language.
Simply wipe on with applicator and lightly wipe off with lightly damped microfiber, that's it. Let it sit over night and you're good to go.
This product is great if you use it right. It’s not like the expensive ones where you leave it on. You put the product on and leave it for 3-5 minuets then wipe off. You can leave it on longer if you want but keep in mind the longer you leave the product the harder it is to take off. Use a micro fiber and go over it 3 or 4 times. Push hard and keep going over it until the cloth glides effortlessly. Let cure for 24 hours then pull outside. I got lucky and it rained the day ofter and I got to see how the water beeds up and rolls right off. Only time will tell how long this will last. I would be happy if I got a year.
-1 star for gibberish instructions.
I used it on my car's side windows to make the water bead and fall off during rain and it really works well. Keeps the visibility high.
I also used it on my headlights after I resurfaced them.
It has been 8 months and its effect is still there, the water still beads and falls off and the headlights are still clear.
0 comments:
Post a Comment