Feature Product
- [Scratch Repair] - Light output and beam pattern restored protect your car from scratching, remove scratches, slight marks and other scratches on the paint surface. Apply this product to the surface to be treated to reduce or eliminate these symptoms.
- [Long Lasting Protection] - Super hydrophobic glass coating, act as a sacrifical barrier coating over the surface of your car's coat. Protect your car from aging, fading, weather and sunlight erosion, acid rain, industry powder, etc.
- [Restores Headlight to A Like-New Appearance] - MOGOI Headlight restoration will restores original clarity and vision to sun damanged plastic headlight lenses. The lenses will be clearer, the headlight will shine brighter, and the road ahead will be better illuminated.
- [Easy to Use] - Drop the fix on the towel, use towel to wipe and polish sponge over the coated fabric, easy steps to restore long lasting uv protection to your headlights, also suitable for cleaning stubborn oil film on the glass surface.
- [Removes Haze] - Headlight lenses on your vehicle can become yellow, dull, and hazy from the sun. Easy steps that provide long lasting UV protection, removes haze and corrosion and restores the clarity and shine you need to see downroad at night.
Description
Features:
- With the hardness of 9H glass coating. The sacrifical coated on the surface can be used as a coat of the barrier.
- It effectively eliminates the car light scratches and solves yellowing, blurring, oxidation and other problems.
- Protect your car Headlights from aging, weathering, erosion, sunshine and sour powder, etc.
- It helps to extend the service life of the car light, shiny as a mirror with excellent high gloss.
- Fully removes haze and corrosion from headlight lenses, the car is more shiny as new.
How to Use:
1. Car bottom cleaning lights to remove dirt.
2. Used the tape to cover the entire area around the headlights to prevent accidental injury to the car paint.
3. Important steps: Using No. No. 320 sandpaper polishing, it is recommended to grind for 5 minutes, so that the yellow surface of the headlights is initially polished off. Use No. 600 sandpaper for 5 minutes, then grind it for 10 minutes with sandpaper No. 1000th. Finally, use No. No. 2000 sandpaper to grind for 10 minutes until the surface of the lamp is polished to a very smooth, mirrored effect. (Note: Grinding requires water spray at the same time.)
4. Clean the surface of the headlights and wait for a complete dry finish. Drop a few drops of the repair droplet on the dust-free cloth, only a few drops at a time. Smear when the way down a direction, not to apply back and forth, the first time after the smear if there is a part of the matte or not through the situation, you can immediately dip a few drops of repair liquid smear matte position, you can restore transparent.
0 comments:
Post a Comment