50ml Ceramic Car Headlight Wax Repair Coating Hydrophobic Anti-fog Agent Sand Paper Cleaning Clothes Car Coating kits
Store Name: Automobile &Motorcycle Store
Rating: / 5.0
Spesification
Description
Features:
*Repairs the yellow, blurred, oxidized, scratched areas of the headlight shade
*Safe, environmentally friendly and pollution-free
*Simple operation, and you don\'t need to remove the headlight shade
*Improves the hardness and wear resistance of the light shade, and prolongs service life
*100% brand new and high quality
Specifications:
*Main Composition: Silicide, etc.
*Capacity: 50ML
*Dosage: 10ml / car light shade
*Effect: 1 year
How to Use:
1. Sanding: Use different sandpaper for sanding (400# coarse sandpaper first, then 800# fine
sandpaper, and finally the 2000# sandpaper accompanied by the water).
2. Cleaning: Clean the headlight shade with water, dry it with a paper towel, and clean it with a
towel.
3. Applying: Shake the product and evenly spray it on the car headlight. Then slowly wipe the
car headlight from right to left with clean wiper, the headlight will become clean and clear.
After 10-20 minutes, if the light is translucent, it is successful. If there are still some matte parts, you
should apply once again. (The coat will curl for 2 to 24 hours after you apply. Don\'t reapply
at this time.)
4. Drying: Let the light naturally dry after applying. There is no need for light or sun light.
It can be used in all weather conditions without restrictions. It will take 1-2 hours to dry the surface. And, the car can be normally washed after 24 hours.
Package Contents:
1*Car Light Repairing Agent
1*Masking Tape
1*400# Sand Paper
1*800# Sand Paper
1*2000# Sand Paper
1*Towel
2*Clean Cloth
1*Instruction
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Package Detail
- Unit Type:piece
- Package Weight:0.11kg (0.24lb.)
- Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
0 comments:
Post a Comment